Instant water filter

Always use the original Philips Micro X ‑Clean filter, marked AWP225. This filter is designed to effectively reduce unwanted substances (e.g. chlorine, microplastics, odors) while ensuring fast filtration.

A slight amount of moisture in the filter is normal. It is caused by the evaporation of water from the filter resin and has no effect on function or safety.

We recommend consuming filtered water within 24 hours to maintain its freshness and quality.

No. The device is not dishwasher safe – clean it regularly by hand.

No. The device must not be exposed to frost - freezing could damage it. However, it can be placed in the refrigerator door - you will get chilled filtered water.

Filter lifetime reset: press and hold the dispense button for 8 seconds. When the filter lifetime reset is completed, the indicator light will flash green light once.

The capacity of the container/kettle is 3 liters. This means that you will get approximately 3 liters of filtered water with one filling of the device.

The recommended filter life is approximately 1 month or until approximately 100 L of water has been filtered (depending on usage). After this time (or at a lower volume if the water or filter is visibly dirty), replace the filter to ensure water quality.

The device is intended for filtering tap water only. Do not use water of unknown quality or water that may be microbiologically harmful.

This device is designed to be used with water of temperature of 2-38°C/32-95°F.

Product dimensions are (L x W x H): 233 x 152 x 263 mm

If the tap water is turbid, please run the tap water for a while before filling in the water tank to ensure the filter lifetime.